Too Noisy

Posted by Ava Stewart on Friday Oct 15, 2010 Under Library 我在圖書館, Uncategorized

2010-10-07 Library

今天一大早送孩子們上學後來到圖書館當說故事媽媽,我很喜歡的一個身分和職稱.今天的故事是Too Noisy,小朋友們都很投入的為故事中的老公公在想辦法,也相當投入的在研究生活中常見物品及動物所發出來的聲音~這是一個很有意義的早晨.

IMG_6462

IMG_6475 IMG_6493 IMG_6494 

故事後配合Ava自製教具自製教具,小朋友們相當感興趣,也讓Ava成就無限.

Tags : , , | Comments Off on Too Noisy

Too Noisy story props

Posted by Ava Stewart on Friday Sep 17, 2010 Under props 教具, Uncategorized

This slideshow shows the door/mouth idea used for a cow’s mouth.

  1. Print the animal head (or door, window etc.). Choose one where the mouth fills as much of the paper as possible.
  2. Cut the part of the mouth that will open.
  3. Stick the printed part to another piece of paper (don’t glue the mouth part).
  4. Make a hole near the top, and another at the end of the mouth (use a needle to make the hole).
  5. Thread fishing line through the holes and tie.
  6. Optionally, use a piece of straw to make a slightly nicer pulling part behind the paper.

看到這教具好一陣子了,他們一直徘徊在我心頭…今天中於完成了.

製做流程:

1.列印出想要的圖案,以博士膜(卡典西德)護貝

2.割開”開合的地方”,由後方補上想要的顏色

3.貼到厚紙板上(不要黏割開處)

4.在步驟三完成的圖片上方和圖片打開的末端兩處以較粗的縫衣針打洞(若是左右開合的圖片,則是在圖片左方和開合處之最右端打洞)

5.穿入釣魚線,加以打結.

6.可選擇在線的末端先穿入吸管再打結,可當小把手.

I got this idea from this wonderful website.

Tags : , , | 3 comments